The one step solution to all your agricultural machinery requirements.
We Believe In Building Trust With Our Clients.
A RELIABLE NAME IN THE WORLD OF AGRICULTURE
5 tips to Save Fuel Consumption in Tractors
Tire Pressure Maintenance – Save up to 15% on fuel
-Pressure of the tier need to adjust as per Axle Load.
-If the tractor is running on the field it should maintain Low Pressure, so tractive power demand, Soil Compaction and track depth reduce.
-If the Tractor running on the Road, then maintaining high pressure will avoid rolling resistance and will improve the rotating speed.
-Under flatted Tire can cause sidewall to become more prone to cracking and Over Flatted tier tent to ride at the center which lead to thread out. So regular inspection is must.
Plan your field run
Plan the field running Layout which lead to lesser running, backward and awkward turn. Choose the match able Plough which is match able to Hours power of tractor, if its small then its leads to underutilization of Tractor power and more running time.
First Opening Plough should be straight and parallel. Avoid re ploughing the land and side land and head land should plough around the field.
Select Match able Implements with Tractor HP:
Implements Size should match with Tractor Engine Full Hours Power at highest gear possible which tractor doesn’t smoke. If you implements is small, tractor will be on throttle even in the top Gear.
Match able implements will avoid the Fuel Wastage and under size implements can consume 30% and more fuel operating at low speed.
Note: Consult an Expert before choosing Implements.
Correct Gear in Driving
when your tractor Struggle Pulling the Load with the Throttle at maximum shift gear to Lower. When its accelerates should shift to higher. Choosing wrong gear position lead to 30 % fuel waste and 50% lower the output.
Note: Smoke from Tractor indicate Overloading. White smoke indicate unclean diesel
Dirt – Clean Air Filter
Air Filtration is very must for engine performance as tractors works always on the dusty field. As per the research unfiltered air creates the wears in cylinder bores 45 time faster and piston rings 115 time faster than Normal. Use Quality Fuel Filters and replace them as per recommend.
Note: Both fuel and Air filter should replace simultaneously and Air filter should be clean by regularly.